William E. Fisher, Jr
SEMI BLOG: 11-07-18
Panama City, Florida.
SEMI with AAA Advanced Air and Mold Solutions, Inc is working hard to serve the public with storm damage from Hurricane Micheal. Many people are still without power, and many are homeless due to the Category 5 Storm. Mold Inspections, and Mold Remediation by AAA Advanced Air and Mold Solutions, is a local business to Panama City, Florida and the surrounding areas. Mold Inspections, Mold Remediation, and Water Restoration is the key to getting your home or business back into an environmentally safe condition for living or working.
The South Eastern Mold Institute (SEMI) has been training people from all around the world. SEMI is a National and International Toxic Mold Training organization since 2002.We specialize in getting the right information to our students so that they can do the professional job needed to restore their customers home or business back to a safe environment for work or play!
AAA Advanced Air & Mold Solutions does professional Mold Testing Sampling, Mold Clearance Testing for the levels of mold contamination, Professional Mold Spraying to kill and control mold growth in any type of dwelling! We also do litigation support to assist your Attorney if your having trouble getting a settlement with your insurance provider.
By using AAA Advanced Air and Mold Solutions you’ll be getting the experience needed to resolve the mold contamination issues you may be facing! Testing is the only way to identify the types and levels of mold in your home or work environment. We collect multiple samples to send off for analysis at a quality laboratory for expert review to get the answers needed for a successful mold remediation project. Mold removal and mold testing in site-built homes, manufactured homes, and commercial buildings needs to be done to the highest standards to combat mold allergens that can cause symptoms affecting the health of you and your family! Black mold symptoms like nose bleeding, runny nose, irritation to the eyes, skin rash, problems with memory are just a few of the problems that Black Toxic Mold’s can have on your health.
Fee’s for mold testing can very, and everyone that does testing is not all the same! Our fee’s include a detailed report on our finding, with photographs taken at the inspection site, laboratory analysis of samples collected, and in most cases a remediation plan to return your home to an environmentally safe condition providing that its not in a totaled out condition.
We Specialize in!
Mold Litigation Support
Call Bill Fisher today at AAA Advanced Air & Mold Solutions, Inc.
A Panama City, Florida based company looking to serve you!
Email Bill Fisher at”
SEMI Blog: 10-22-18 by William E. Fisher, Jr.
Now that Hurricane Michael has made landfall we are still have problems with water damage! Toxic Mold Growth will start growing on the interior wall’s of homes, and business in those effected areas. As the water levels drop the mold will start to show itself becoming visible to the naked eye!
As flood water start to drop we also are going to have a problem with bacteria! Flood water from the ocean, rivers, and lakes are loaded with fungal and bacterial contamination. Sinks, bathtubs, washing machines and anything else that can hold water can become the ideal place for bacterial as well as fungal mold growth.
AAA Advanced Air & Mold Solutions, Inc, and The South Eastern Mold Institute Inc does Storm Damage Consulting. We do Mold Inspection, Mold Remediation, Anti-Microbial Spraying of Contaminated Homes, and Business! We also write remediation plans for the restoration of buildings, and Litigation Support for cases involving Lawsuits for Mold Contamination.
Beware of Scammer!
The problem with any kind of disaster is sometimes all the bad people come out to make a quick buck by taking advantage of you at your weakest! DON’T Pay Cash up front for any kind of work! If you do just make sure that they are a legitimate business! We get paid up front on Mold Testing, and Spray Treatment of buildings! But we do have a proven track record and we have been in business In the Panama City, Bay County area since 2002. The Mold Inspection, Mold Remediation, and Water Restoration is like any other business. You have the good and the bad so don’t lose heart! Just do a little checking around before you do business with them. Lot’s of Church Groups will also come into your area to help with clean-up! That can cause some problems because if they get there before the real professionals do it can cause the pro’s to maybe miss some of what has been going on at your property! Like trying to do autopsy after the body has been cremated!
Over charging is going on already from what I’m hearing coming from the field. One job was bid on by three companies! One bid was around $16,000.00 the second was around $24,000.00 and the third was somewhere in the 30’s! Some of these folks putting out bids have no formal training for Mold Inspection, Mold Remediation or Water Restoration! If your having a problem call us at SEMI ask for William E. Fisher 850-276-3135 or visit us at www.moldclass.com or www.safehome4u.com
Toxic Black Mold Contamination can be a real problem! Use Personal Protection Equipment (PPE) before your enter your mold contaminated home or property! If you don’t take the time to protect your health no one else will. Don’t put your health at risk without using protective proper equipment! It can save your life.
Get your roof protected as soon as possible!
Mold contamination will become a bigger problem as time passes! Home still standing in Lynn Haven Florida, Panama City, Mexico Beach, and the surrounding area’s can start to show visible mold growth on wall’s, ceiling’s, carpeting, and furniture as time passes! Get your roof’s protected as soon as possible! The more water intrusion into the home the heaver the mold growth will become! Rain pouring into the interior of the already mold contaminated building will greatly spread mold throughout the building creating an environmental hazard to anyone entering without using any protective equipment!
Toxic Mold Contamination is a real problem that should not be taken lightly! Safety should come first, and fore most when dealing with it! It only takes 24 to 36 hours for mold to start growing inside your home or business. So time is a big factor in combating the mold contamination.
AAA Advanced Air & Mold Solutions Inc www.safehome4u.com and The South Eastern Mold Institute www.moldclass.com has been fighting mold contamination in this area for over 20 years!
William E. Fisher, Jr is the only Person to receive a Letter of Commendation from the Florida Department for work and consultation for State of Florida owned properties!
We Specialize in!
Mold Litigation Support
Call’ Bill Fisher today at 850-276-3135 or email us at firstname.lastname@example.org
Hurricane Florence Major Flooding
Tip’s for Homeowners & Business!
By William E. Fisher, Jr
As Hurricane Florence makes landfall higher then normal tides, and storm surge can cause catastrophic damage! After the flooding has accrued it may still be days or weeks before you can gain access to your property, and belongings. It only takes 24 to 36 hours for mold to start to take over the interior of homes and business. So by the time you can re inter your property the mold growth will be well on its way to contaminate the interior. It all comes down to timing the sooner you can get started the better! Most homes have drywall and that kind of material can still stay wet for days before it can dry out. Drywall is also an ideal source for food that can increase the speed of the mold growth. Mold is a plant and the spores it produces are seeds that will create new adult mold spores. So as long as you have wet material and high humidity the molds spores will continue to grow taking over the interior of the building.
If your trying to do some of the mold remediation yourself make sure that your body is protected from the Toxic Mold Contamination that’s now eating your home! Use Personal Protective Equipment (PPE) to protect your airway, eye’s, and skin. Most of these products can be picked up at Home Depo or Lowe’s. White disposable protective clothing, Rubber Boots, Rubber Gloves, Chemical Goggles, and if you can afford it a full face Mask with filters. You can use a paper mask but personally I feel they fall short on giving you the protection you need but their better then nothing! DO NOT! Go into a heavily mold contaminated building without your Personal Protective Equipment! (PPE). Again that means NO” flip flops, short’s or tee shirts! The stuff you normally have on everyday just wont cut it for any real protection.
Per EPA (Environmental Protection Agency) Guidelines says anything damaged by flood waters such as ocean, river, lake, or sewage should be discarded and replaced. This is not water form a water line leak inside your home! It contaminated water full of mold and bacteria! Hard plastic’s, metal, glass, pot’s, and pan’s can be cleaned and salvaged! Anything with a hard non porous surface can be cleaned! However damaged clothing, furniture, carpeting, padding, bedding must go!
Get the Black Mold Contaminated material out of the building as soon as possible! But before you start the Mold Remediation Process make sure your using your Personal Protective Equipment! Many people over the years doing mold remediation without using (PPE) have come down with pneumonia! It can kill you folks under the right conditions so be real careful if you decide to take on a mold project on your own! It’s your property you can do what you want but use your head and be safe wile doing it!
The South Eastern Mold Institute has been training students since 2002, and is a part of AAA Advanced Air & Mold Solutions, Inc. We do Toxic Mold Inspection / Mold Remediation Training, Mold Inspections, Mold Remediation, Spraying Mold and Bacteria Contaminated Buildings, Litigation Support, and Consulting.
William E. Fisher, Jr has been in the Housing Industry for over forty five years and has attained a wealth of knowledge of building technology as well as the Indoor Air Quality Industry. Mr. Fisher is the only person in Florida to ever receive a Letter of Commendation from the Florida Depart of Environmental Protection for work and consulting of Florida owned properties.
Some of the common mold’s that will be growing inside your newly mold contaminated home or business can be Aspergillus, Cladosporium, and Penicillum. The Aspergillus Mold’s can look green or brown and can cover everything sometimes looking like dust. If you look at the mold and it looks dry don’t think for one minute its dead! No its now in a dormant state like sleeping just waiting for the right conditions to start its regrowth! The right condition is water and or high humidity!
Penicillum Mold loves wet carpet and when it becomes active is white in color. Within a few days it will cover your carpet damaging it beyond repair! If you have any kind of mold growing on your carpet get ride of it! Don’t let any carpet cleaning company tell you that they can get it all! That impossible! If you let them try it will come back then you and your family are now living in a mold contaminated environment.
For your information (FYI) No one can walk into your Mold Contaminated Home or Business and tell you with 100% accuracy what is growing on your property! There are over 34 plus mold’s in the family of mold’s called Aspergillus, and some of them are more dangerous to humans then others. The only way for sure to know the kind of mold’s growing your mold contaminated property is through testing! Their are over one hundred thousand known molds so far! So if someone comes in and starts identifying then all over the place send them away! If they tell you then can make all the mold in your home go away that’s also not true! Mold is the Worlds largest Bio-Mass! So every time you open a door or window mold will come in.
Certified Mold Inspector’s and Certified Mold Remediator’s trained through The South Eastern Mold Institute, Inc in Panama City, Florida are the best trained technicians out there today! The skills used by SEMI trained personal are among the very best as Water Restoration Professional’s!
If you need your property skillfully saved look for the SEMI Mold Certification for the BEST!
To get your SEMI Mold Certification see us at; www.moldclass.com
For Mold Inspections, Mold Remediation and Water Restoration
AAA Advanced Air & Mold Solutions, Inc.
Hurricane Florence A Water & Mold Damage Event on the Horizon!
By William E. Fisher, Jr
President of the South Eastern Mold Institute & AAA Advanced Air & Mold Solutions, Inc.
Yes’ Hurricane season is here once again and the 2018 storms are on the increase as we enter the middle of the storm season. Mold contamination in storm damaged homes can be one of the worst experiences you can face. Its bad enough your personal property get water damaged but then within 24 to 36 hours after the flood waters have receded that Black Toxic Mold is now everywhere!
When your given permission to re-enter the storm damaged area make sure you go back with the proper equipment before you enter you water, damaged home or business. First of all do NOT go into the building with flip flops, short paints, and a tee shirt! After Hurricane Katrina Hit New Orleans, LA the damage was catastrophic! Hurricane Florence more then likely do the same type of damage or worst!
When you return you may discover that your standing in the middle of a Toxic Mold Envelope. In other words the indoor air quality could be thousands or even millions of times higher then the outside air. So if your walking around trying to pick through you contaminated belongings there could also be another sinister agent hiding in your home or work place! Its called Bacteria! Everywhere that water can stand or be trapped can also breed Misquotes, Mold and yes Bacteria! The problem is without testing of the contaminated material you never know for sure just what your dealing with. Anyone going into these Mold, and Bacteria contaminated structures are playing Russian Roulette with their health! Yes if exposed to a very high level of mold spores and or bacteria you can get very sick! You only have one life so take care of it!
Before going into your mold contaminated building make sure your protect! At the very least have a Mask to protect your airway, eyes, and skin. A full face mask or paper mask! Remember the mold spore level can be in the millions. When you breath under normal conditions your taking in about a dozen mold spores per breath. But in an extremely contaminated environment it could be in the tens of thousands or in the millions per breath. Rubber gloves, paper suite, rubber boots, should be used for your protection. Go on line and look up Personal Protection Equipment! (PPE).
Mold is invisible to the naked eye! You can get over 150 thousand mold spores on the head of a straight pin! One square foot of mold on a wall or any surface can contain as many as 300 million mold spores! As you start removing mold contaminated mold the mold spore levels can reach over 1000 times higher where your working! Never work in these areas or allow your children to enter into these contaminated work areas! Don’t allow your children to help you especially if there is no personal safety equipment available! (PPE).
Church groups like to come into these areas trying to help but I’ve also seen where they failed to have proper safety equipment to protect their workers. Their hearts are in the right place but without proper training they can do more damage to the property and their selves as well. The South Eastern Mold Institute has hands on classes as well as study at home courses for beginners getting into these dangerous contaminated structures. Remember planing, and safety comes first!
AAA Advanced Air & Mold Solutions, Inc is a company that has taken on big and small jobs in regards to Toxic Mold Contamination. Consulting for Water Damaged Properties, and William E. Fisher, Jr is one of the very few people that also offers Litigation Support for Court Cases for Mold Issues. Consulting for Attorneys helping their clients fight Insurance Companies not wanting to cover storm damages, and Mold Contamination. We also do Spray Treatments for Mold Contaminated buildings to combat the growing Fungal contamination.
The South Eastern Mold Institute is the training arm of its parent company AAA Advanced Air & Mold Solutions Inc. We train Governmental Agencies, Collages, and University’s, Church Groups, First Responders, and people of all walks of life trying to combat mold contamination.
Lets talk about Chemicals to kill mold contamination. Don’t use Bleach because its to week to kill the mold on contact, and it evaporates to quickly to soak into the material you may be treating. There are a lot of chemicals on the market. Some work and others don’t! The importation thing is using (PPE) Personal Protective Equipment. Your mask will need to have chemical filters because anything that can kill mold can also kill people. If your only using a paper mask make sure your also using Chemical Goggles, and not the Carpenter Goggles with all those air holes! If you think its to much for you to handle please get a professional to do the job!
We sell an Anti-Microbial product called Fisher’s Sub-due XXX. For information, and price just call us at 850-276-3135. We do this for our students that have taken our Mold Inspection, Mold Remediation, and Water Restoration Course. We are still running our Summer Special for the Study at Home Course at $550.00 Dollars U.S.
Get your Mold Inspection, Mold Remediation, and Water Restoration Certification through the South Eastern Mold Institute. Your Toxic Mold Educational Resource that can elevate your business to the next level of success! Call us today! 850-276-3135 www.moldclass.com
For Mold Inspections, Mold Remediation and Water Restoration
AAA Advanced Air & Mold Solutions, Inc.
Problems With Wall or Window Mounted Air Conditioners!
By William E. Fisher, Jr
Over the years I’ve been called into troubleshoot problems with window and/or wall mounted HVAC Systems. There used almost everywhere, and can do quite well as long as they are installed properly with proper maintenance. These types of HVAC Systems are common at Motels, Schools, Portable Classrooms, older high-rise buildings, and yes in your home’s. The bad thing is they are not properly keep up with when it comes to maintenance! And with that proper cleaning and filter cleaning or replacement. At first the homeowner will clean or change the filters but as time goes by they get forgetful and let it go. Then over time the dust build up creates a mold contamination problem.
Some of these filters are made of plastic and easy to clean wile other don’t and those are the worst to maintain. As these units are running to keep the room area cool or warm depending on the season its being used! They get dirty and full of dust, lint, dog or cat hair, human hair, carpet fibers, and human skin that we shed everyday.
So now you have all of this material sticking to the coils and fins because they sweet with condensation (water), and now you have the perfect environment for mold growth, and yes sometimes bacteria. The bacteria can be just as bad if not worst in some cases then the mold. But if you have both mold and bacteria then you have double trouble!
On the installation side of things air gaps that are around the wall mounted or window installed HVAC Systems can cause a problem and speed up the mold growth process. The process is called Negative Air and this will allow the cooling system to pull in hot humid air from the outside in the summer or even in the winter time the condensation will still be present. This will cause mold growth due to additional condensation (water) in and around the HVAC creating an ideal environment for toxic mold growth. So the system will need to be sealed with an approved caulking or some type of rubber gasket to restrict any air movement around the system.
In schools, motels, apartment buildings the temperature should not be set to the lowest sitting. Try to keep it set at around 72 to 75 degrees for comfort. I’ve seen 60 degree settings with no one using the rooms causing excessive sweating from condensation. It would be wise to have the system adjusted to keep people from setting the cooling units thermostat below 72 degrees. You have to remember that inside the cooling unit you have super cooled areas that come into contact with hot air from outside that will make the metal sweat allowing more water to be available for mold growth.
William E. Fisher, Jr President of the South Eastern Mold Institute covers these problems and more during his training classes to help students to cope with these types of mold issues. Mr. Fisher is also the President of AAA Advanced Air and Mold Solutions (www.safehome4u.com) doing Inspections, Remediation, and Consulting. Students that attend the Mold Training Classes all receive a Certificate that covers Mold Inspection, Mold Remediation, and Water Restoration. SEMI has been training students around the World since 2002, and is used by more Governmental Agencies, Universities then any other in America today! So for a quality hands on class or study at home program call Bill Fisher at SEMI today at 850-276-3135 or visit us at www.moldclass.com for training or www.safehome4u.com for Inspection, Remediation, or Consulting!
SEMI Student Training & Certification Since 2002
About our National & International Training Institute.
By William E. Fisher, Jr 07-15-18 The South Eastern Mold Institute Blog
If your looking for the best and most comprehensive Mold Inspection, Mold Remediation, and Water Restoration Certification then look no further then the South Eastern Mold Institute (SEMI). Where your educational needs are based on hands on experience accumulated over four decades of customer satisfaction in the art of Mold Inspection, Mold Remediation, and Water Restoration. When you have SEMI’s professional recognition on your certification professionals take notice recognize your abilities and expertise in the field’s of Mold Inspection, Mold Remediation, Water Restoration. SEMI was founded by a housing contractor for building contractors as well as others that make their living in housing, and commercial construction fields. Roofers, Home Builders, Plumbers, Mobile Home Installers, Handyman, Drywall Installers, and many other fields will greatly benefit from having their Certification with the SEMI Logo! As an SEMI Certified Mold Inspector, Mold Remediator, and Water Restoration Professional you’ll have the educational tools to succeed and take your company to the next level. SEMI classroom training, and/or study at home training gives you the student the certified mold professional recognition needed to get ahead of your competition in your target market area.When we get call’s for your area we do give you customer referrals, as they come in. We also give our students great professional support, and with your added Water Restoration designation on your certificate, Bank’s, Mortgage Companies, Insurance Companies, and Property Management Company’s like to see that you have had training in the field of Mold Inspection, Mold Remediation, and Water Restoration. SEMI Certification carries more weight due to the fact we are used by more federal, state, county, and city governmental agencies then any other. We have had great success with our distance learning programs for mold related services! See our testimonial section for student feedback of our advanced mold training, and remediation programs.With SEMI you get the added benefit of student support that we supply for your current and/or future mold inspection, and mold remediation projects. Water Restoration in conjunction with the Inspection, and Remediation Certification will give you that added boost to keep you ahead of your competition! In this industry what it really comes down to is experience that’s rooted into your advanced training from SEMI. So when it comes to your fee’s, insurance, chemical’s, equipment, and safety protocols your only a phone call or email away to get expert advice you’ll need to get the job done, and get it done right!
William E. Fisher,. Jr President of SEMI has the reputation, and proven experience to guide you through the difficulties that may arise in your Mold Inspection, Mold Remediation, and Water Restoration Projects.!
Thanks and remember if you want the best education possible forget the rest and join up with SEMI a National, and International Certifying Body since 2002.
William E. Fisher, Jr. President of SEMI. 850-276-3135.
Mold Inspections, and why they are necessary!
William E. Fisher, Jr.
Their is nothing more important they your health, and once you lose your good health its hard to get it back. Mold contamination in your home or work place can greatly effect your health. Just because you don’t see it doesn’t mean you don’t have a problem. Your nose is your first line of defense because in most cases you’ll smell it before you see it growing on ceilings, walls, carpeting, or your furniture. Sometimes it’s all over everything like someone used a pepper shaker to spread it all over exposed surfaces. A fact you should always keep in the back of your mind is mold spores are invisible to the naked eye! So if you do see mold growing on any surface one square foot can contain over three hundred million mold spores!
Realtor’s and property owners don’t like to talk about Mold Issues! Often they will try to hide the problem and hope that the prospective buyer will sign on the doted line passing the mold contamination problem onto someone else. The last two cases I sat in court as an expert witness was against Realtors who failed to give full disclosure to the prospective buyer of the contaminated properties.
In todays world we are learning more and more everyday about the effects of mold contamination on the human body. But when it comes to spending the money for the information to make wise decisions in regards to buying a environmentally safe property very few will spend the money. Most folks selling property don’t want to spend anything they just want to sell! The home buyer thinks if anyone should spend money for a mold inspection it should be the seller! After all the home or business should be safe if your placing it on the market to sell, and maybe their right! But at the end of the day the only way to truly know if a property is safe is by a detailed mold inspection to prove the home or business is within our industry standards.
For detailed toxic black mold inspections those trained by the South Eastern Mold Institute are the best trained today. AAA Advanced Air and Mold Solutions, Inc is the best Mold Inspection and Mold Remediation company today, and also provides litigation support along with consulting for mold contamination issues. The South Eastern Mold Institute is the ideal information resource for your Mold Inspection, Mold Remediation educational needs. Based out of Panama City Florida we also cover the south eastern United States. You’ll learn just how dangerous black toxic mold can be. How to kill black mold, and how to clean black toxic molds.
AAA Advanced Air and Mold Solutions, Inc headed by William E. Fisher, Jr has the life long skills, and training to get your properties back into an environmentally safe condition. Our documentation will give you the legal foundation you’ll need if your selling or buying a property. Mr. Fisher can be reached at 850-276-3135 for your educational, inspection or remediation needs. www.safehome4u.com
is the website or email Bill Fisher at email@example.com or firstname.lastname@example.org
For your Mold Inspection, Mold Remediation or Water Restoration Training for Toxic Mold Contaminated Properties give SEMI and AAA Advanced Air & Mold Solutions a call today!
William E. Fisher, Jr is a Licensed Florida Mold Assessor, Mold Remediator, and Mold Services Training Provider! Become a SEMI Member for Life! www.moldclass.com
Tropical Storm Alberto
The Flooding of Ellicott City, MD.
William E. Fisher, Jr.
Well we are interring into another new year and getting into the rainy season once more. Flooding of homes and business will be hitting us again, and with the flooding comes mold growth creating a toxic mold environmental nightmare!
AAA Advanced Air & Mold Solutions, and The South Eastern Mold Institute (SEMI) are here to help home and business owners find the right path for your mold contaminated issues. It only takes twenty four to thirty six hours for mold to start growing in your home and on your furnishings. For information on Black Mold Treatments, How to kill mold, and how to remove mold from drywall, we can give you the best way to go in solving your toxic mold problems.
The South Eastern Mold Institute is all about how to educate the public, and contractors on mold issues that effect the public at large. How to kill and control mold growth, How to clean black mold, toxic mold symptoms, and Black Mold Treatments is what SEMI is all about! Getting you the information needed to fight and save your mold contaminated home and property.
AAA Advanced Air and Mold Solutions covers all of the South East United States!
Black Mold Treatments, Black Toxic Mold Inspections, Consulting on Mold Contaminated problems, will give you the information and mold professional expertise to resolve your damaged properties. Panama City, Tallahassee, Miami, Jacksonville, St. Petersburg, and Tampa are just some of the Florida City we cover for our customers. We also service Alabama, Georgia, and all other city’s in-between!
We also offer litigation support and William E. Fisher, Jr has been in court several times serving as an expert witness on black mold related issues. For flooded building in Alberto path, and water damaged buildings in Ellicott City Maryland we also have the ability to inspect, and or train you by certification through SEMI. If your a property owner of any mold contaminated buildings SEMI’s Mold Inspection, Mold Remediation Training, and Water Restoration course would be ideal for you. Because for a small investment you could save thousands of dollars doing some of the remediation yourself.
Mold contaminated is dangerous work so don’t try without getting your SEMI Mold Certification! Without proper training removing mold contaminated drywall, and other contaminated materials in the flood damaged building can hurt or even kill under the right conditions. We sell the right chemical to combat, and control mold growth. See our website www.safehome4u.com under products for Fisher’s Subdue XXX. A little goes a long way for only $250.00 dollars per gallon. Just add on ounce to a gallon of distilled water for the best anti-microbial mold treatment possible. Or Call Bill Fisher to set up an appointment.
Call Us Today at 850-276-3135 and ask for Bill Fisher President of SEMI, and AAA Advanced Air and Mold Solutions. Our training at home program is $550.00 our hands on class is 1,250.00 and
a privet class one on one is $1,500.00. Call today to take advantage of our advanced program.
Why SEMI is the way to go for Mold Related Services Training!
William E. Fisher, Jr.
The South Eastern Mold Institute (SEMI) is happy to announce that we have updated our school website. We will be adding additional photos and text for our students to enjoy! SEMI’s Mold Inspection, Mold Remediation, and Water Restoration Certification is still of the highest degree of value when it comes to the Mold Related Services Training that only we can truly supply!
SEMI by Defacto Standard has proven time after time the we are the most reputable Mold Training Organization in America today! Our record stands and we have been approved, and used by more Federal, State, County, and City Governmental agency’s then any other Mold Educational Service for over the last sixteen years. With students across America, and the World our National and International standing exhibits that the South Eastern Mold Institute Inc not only sets the Bar for excellence we are the Bar!
Toxic Mold Certification by SEMI gives your company the ability to stand tall in the Inspection, Remediation, and Water Restoration Industry! Many agency’s now look for the SEMI Certification on Vendors Paperwork when bidding on government or municipal projects. Our training organization has been training students since 2002 and our class curriculum is based on hands on experience gained in over 45 years in the housing industry.
The Mold Related Service Training and Certification of our course material is from the real working experience by Bill Fisher President of SEMI and AAA Advanced Air & Mold Solutions, Inc. Your questions asked during the training program are always answered during the class. After your training and certification for the art of Mold Inspection, Mold Remediation, and Water Restoration we will help you and your company with advice as needed on your mold projects as needed. We also pass along referrals if someone contacts us about their mold problems in your area.
Our mission is to train those with the guts and determination to see these jobs through to the end. To train students to be able to do the very best possible for their customers! To protect, and see to the health of not only the home the customer lives in but for their well being as well. You’ll discover the investment you make with The South Eastern Mold Institute for your mold educational needs will be money well spent!
SEMI doesn’t have to buddy up with other organizations to try to give ourselves a faults sense of legitimacy! The government agency’s that use our services do that for us! When you join up with SEMI we do not ask you to pay a yearly registration fee! Once your trained your a member for life. So if you would like to become a member of the SEMI family sign up for your training and become part of our National and International Family at SEMI. The study at home course is only
$550.00 our Hands on Course is $1,250.00, and Privet one on one classes are still $1,500.00.
Mold Certification from the South Eastern Mold Institute is everything you’ll need to know about being successful in this business of mold in any type of building! We are about the science of mold contamination education! Special thanks to our SEMI Certified Students for making us number one in this fast growing industry!
What is Accreditation? Definition & Meaning!
Blog… By William E. Fisher, Jr.
President of AAA Advanced Air & Mold Solutions, Inc.
President of The South Eastern Mold Institute, Inc.
It has come to my attention recently that some people do not understand the difference between accreditation, and certification. Lets look at the Mold Inspection, and Mold Remediation Industry for an example. Today you have Mold Training Organizations that have no real standing but that doesn’t keep them from taking your money and giving you a worthless piece of paper. Yes it may look pretty hanging on your wall but that all you get. Their accreditation, and certification is build up on a pile of innuendo and half truths. Never the less your getting ripped off, and that’s a real shame because money is hard to come by these days. Remember in the Wizard of OZ the little man behind the curtain pulling cables to make lightning and thunder? Well that’s who some of these guys are! All you have to do is take your time and do the research.
First I’m going to explain where we get our accreditation, and about our certification! We are recognized by Federal, State, County, and City Governmental Agency’s. The South Eastern Mold Institute (SEMI), and AAA Advanced Air & Mold Solutions, Inc are both used by the before mentioned agency’s! That gives us our Accreditation, and our Certification. Both words are more or less the same in design. Government Agency’s are required by their own protocols and laws to use those that fall into their qualification guidelines for vendors to service their properties, and for companies to do their educational training. We do both for them and have the documentation to prove it!
One of the things that I’m very proud of is the Letter of Commendation we received from the Florida Department of Environmental Protection back in 2007. As far as I know we are the only company that has ever received one. We have done Inspection, remediation, and Spray Treatments on Mold Contaminated buildings for Florida. I have also trained Inspectors for The Florida Department of Health Care Adminstration to insure that their employees are safe, and know what to look for in Nursing Homes, Assisted Care Living Facilities, and other building that come under their supervision.
The Mold Inspection and Mold Remediation Industry is NOT! Under any Federal Agency, and there are only a few stated that even have a program that licenses for mold or mold remediation. And that’s a real problem folks. You see some of these people in business came out from nowhere and decided that if their in the carpet cleaning business well their also now mold experts. And some of these people have ended up with disastrous results with one resulting in death in Panama City, Fl a few years ago. In that case they did not remove the mold contamination the tried to hide, and conceal it!
Other companies have given themselves self accreditation, and certification along with creating fake websites with no address, phone number or email address making it almost impossible to talk to someone. Like I said above do some research before you sign on for a class with anyone.
The South Eastern Mold Institute Inc and AAA Advanced Air & Mold Solutions, Inc has been recognized, and qualified by the above Agency’s so our accreditation and certification is of the highest value for your Mold Training educational needs! We have also been acknowledged by those agency’s by their employees and regulators in authority qualifying us for their service, and educational needs.
The President William E. Fisher, Jr. is a Florida Licensed Mold Assessor, Florida Licensed Mold Remediator, Florida Licensed Mold Related Services Training Instructor, Former Florida Licensed Mobile Home Installer, and Former Florida State Inspector, Inspecting Mobile Home Factory’s, RV Dealerships, and Consumer Complaints.
For your Advanced Mold Certification in Inspection, and Remediation, or for Consulting on your Mold Related Issues give Bill Fisher a Call at: